This is an easy way to update to the current firmware of the Linksys/Cisco PAP2T Phone Adapter, using your browser. Using the upgrade url supplied and placing the .bin file in your Dropbox public folder makes it easy.
1. Download the updated firmware file from Cisco/LinkSys (5.1.6 is latest as of today) from here: DOWNLOAD
2. Place the .bin file that is in the .zip file you downloaded into a public Dropbox folder.
3. Go to the Dropbox web interface, find the file select it, and click More Actions –> Copy the public linkWatch movie online The Transporter Refueled (2015)
4. Open a new browser tab or window and enter the following upgrade URL:
“http://[enter PAP2T-IP here]/admin/upgrade?[enter your Dropbox public link for the .bin file here]”
5. Do not power off the phone adapter. The status light will flash while the firmware is being updated. When the light stops flashing the update is complete.
Hi
I have tried this but it does not work.
I get a message on screen to make sure pap is not active and then it will begin its upgrade. Nothing happens after that, no flashing lights.
Any ideas please.
The file is no longer available for download! 🙁
I just checked, the file is still there,
It is.. but if you click the download button it says it is no longer available for download. I’m hesitant to download from a generic file upload site. Any recommendations or could someone post a known good (and tested) copy?